The Beurer LB12 Mini Air Humidifier is a small, highly portable device you can take with you virtually anywhere you to enjoy the benefits of breathing fresh air. It uses ultrasound humidification technology to ensure optimum air humidity in your home. What makes it different from standard humidifiers, however, is that it works with a standard plastic water bottle that functions as a removable water tank.
Features:
Compact design makes it ideal for office or travel.
Suitable for use in rooms up to 20m
Low-energy: only 12 watts
Highly safe operation with 24V voltage and automatic switch-off
Nebulization output up to 80 ml/h
Can be used with a standard plastic bottle
2 Bottle adapters included for standard plastic water bottle (28 und 30 mm diameter),cleaning brush, mains adapter and storage bag
Illuminated mist outlet and visible water levels
Automatic switch-off if bottle is empty
Removable parts are dishwasher safe
Supplied with a 3-year manufacturer’s warranty
Directions To Use:
Remove the packaging material.
Check the device, mains plug and cable for damage.
Place the air humidifier on a even, firm, flat and humidity-resistant surface. Ensure that the air humidifier cannot be knocked over.
Position the air humidifier in a raised place, e.g. a table, chest of drawers, chair or bedside table. To avoid damage from the escaping mist, the device must not be placed on the floor.
Ensure than the top is placed firmly on the base. Pull the mist outlet upwards until it noticeably engages. For this purpose, you must overcome the rest resistance in the initial position with a forceful tug.
Make sure that the escaping mist is not directed at the bottle, wall, plug socket or other objects and that the air outlet always remains free.
Fill a 0.5litre plastic water bottle with clean tap water, distilled water or still water. Do not use carbonated water. The manufacturer expressly recommends the use of distilled water so as to avoid limescale. The water temperature may be a maximum of 50C, so as to avoid damage to the device.
Fasten a bottle adapter onto the bottle. There are two adapters available that fit most standard plastic bottles: 1) PC 1810 thread with a thread diameter of 28 mm and 2) 30/25 thread with a thread diameter of 30 mm.
Turn the bottle upside down and place it in the top of the air humidifier. Do not compress the plastic bottle. The base will fill with water automatically.
Connect the power supply unit connector plug with the connector socket of the air humidifier and insert the power supply unit into the socket. Ensure that the cable does not pose a trip hazard.
Turn the control dial clockwise (to the right) to switch on the air humidifier.
Reviews
There are no reviews yet.
Be the first to review “Beurer Air Humidifier LB12” Cancel reply
-20% 
Reviews
There are no reviews yet.